ETC Supplies offers the Freedom Ring for anyone who does any kind of embroidery. The Freedom Ring with its patented design allows you to quickly frame up garments such as polo and T-shirts without any marking on the fabric.
This new Freedom Ring will also save you hours of wasted time adjusting the thumb screw as the Freedom Ring has a self tensioning spring mechanism, says ETC Supplies.
The Freedom Ring is available in 12 cm and 15 cm round and can be ordered with any complete hoop assembly offered by Durkee. Or the ring may be purchased as an outer ring only to use as a replacement ring for Allied, Durkee, Happy, Melco, SWF, and Tajima hoops.
How does it work
1. The top edge is bevelled making it easy to insert the inner ring. An extension spring provides proper tension.
2. Press the inner ring into the Freedom Ring.
3. Recess the hoop by pressing the inner ring slightly lower than the outer ring.
Or, for thicker fabrics there is an easy option.
1. Open the Freedom Ring approximately 1 1/4″ and the Yellow Locking Pin will engage.
2. Insert the inner ring and hold in place. Pull out on the yellow locking pin to release the lock.
3. Recess the hoop by pressing the inner ring slightly lower than the outer ring.
